Hard to find neutral with engine running


4 replies to this topic
  • johunter666

Posted February 21, 2006 - 05:32 PM

#1

Have 05 Wr450. Approx 800 miles on it. No abuse. Have done many oil/filter changes using Yamalube. Having trouble finding neutral while engine running. No other shifting problems. My clutch is adjusted properly. Does this hot or cold. Any ideas?

  • Matty05

Posted February 21, 2006 - 06:44 PM

#2

It is all you!

Just put slight pressure on the gear lever, you want it to click out of 1st, not go to far and click into 2nd. You will get the hang of it.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bigdrtrdr

Posted February 21, 2006 - 06:51 PM

#3

You might also have just a bit to much freeplay at the lever.
Eric

  • Dirt_rebel

Posted February 21, 2006 - 09:18 PM

#4

try the 79cents thumperfaq clutch fix mod..it helps alot..

here's the link: http://www.thumperfa...clutch_mods.htm

  • ShadyatBest

Posted February 21, 2006 - 10:37 PM

#5

just read that tip, very good idea




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.