wheres everybody puttin there hourmeters


9 replies to this topic
  • ThumperKid250F

Posted February 21, 2006 - 03:44 PM

#1

hey i got a 06 yz450se and i just got a hourmeter and would like to put it on befor i really ride the bike, so where is everybody puttin it on there bike..

thanks mike.

P.S i got the SenDEC hour meter from sears so does anybody have it and how do they like it..

thanks

  • N_Boyd

Posted February 21, 2006 - 03:55 PM

#2

I use to have a meter, It was on the frame by the triple clamps, but it fell off. :thumbsup:

  • PK

Posted February 21, 2006 - 03:56 PM

#3

I bought a Sendec hourmeter as well and the first one worked for 10 hours then died. Sendec sent another right out though so kudos to them. I mounted mine on my 03 on the frame just above the right hand radiator. It was easy to see there and out of harms way as well as being close to the spark plug.

  • ccbugman

Posted February 21, 2006 - 05:22 PM

#4

I put ours on right in front and above the radiator on the frame.
So far, they are working fine, 16 hours on one and 4 on the other.

  • Idaho_Stas

Posted February 21, 2006 - 09:36 PM

#5

I put ours on right in front and above the radiator on the frame.
So far, they are working fine, 16 hours on one and 4 on the other.


Ditto. Same on my '06. Also a Sendec and seems to be working fine.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Ga426owner

Posted February 22, 2006 - 05:46 AM

#6

I ziptied mine the the throttle cables right there above the radiator cap

  • Butta

Posted February 22, 2006 - 06:53 AM

#7

I put ours on right in front and above the radiator on the frame.
So far, they are working fine, 16 hours on one and 4 on the other.


I've got mine on the same place, tacked with super sticky foam tape, and after more than 20 hours it's holding great.



Hey Brian, did you get your new 450 yet?? I wasn't able to make the race at DD this weekend due to my daughter's horse show. Gotta make the next one........
Travis

  • PK

Posted February 22, 2006 - 08:04 AM

#8

Bryan bought the last one a few weeks ago. I sold my 03 and expect my 06 late next week so if you want to go to CycleRanch with the families, let me know. I imagine it was pretty cold at the race this weekend...

Pat

  • DPW

Posted February 22, 2006 - 08:17 AM

#9

3m two sided tape on the frame

http://www.thumperta...achmentid=11616

  • tnl

Posted February 22, 2006 - 09:50 AM

#10

Zip tied mine too right over the rad. to the cables. 10 hours so far and no problems.





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.