Complete seat for '01 WR426F????

4 replies to this topic
  • Dougd

Posted February 19, 2006 - 04:42 PM


Does anyone have an idea where I can find a complete gripper seat for an '01 WR426F, preferably high. I've looked briefly and only finding covers and foam. YZ is easy, but I haven't found one for the WR. My existing seat frame is toast.

  • kizzle426

Posted February 19, 2006 - 04:48 PM


Go to and put in your bikes make/model/year, then look up body components. You'll see an SDG complete seat for around 89 bucks in tall or stock. I'm about to get one.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Dougd

Posted February 19, 2006 - 05:22 PM


On Motosport I plugged in specs and got a message " no matches", but YZ seems not to be a problem. I'm not sure of the exact differences of YZ vs WR concerning the seat, maybe the're the same???
Thanks for you help.

  • kizzle426

Posted February 19, 2006 - 06:02 PM


I'm almost positive there is no difference. It'll fit.

  • TeamScream

Posted February 19, 2006 - 06:05 PM


They are not the same, the WR seat is shaped a bit differently as the tank is also a bit bigger.
Now would be a great time to look for a used tank and seat from a YZ of the same year, it is a great mod and makes the bike feel a bit smaller and narrower.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.