Remote Killswitch

No replies to this topic
  • liszewski_88

Posted February 13, 2006 - 08:48 PM


Hey I did a search but came up empty or i'm just blind but I need to know what wires to hook up my pro design kill switch to. I don't have a push button one because I did a YZ conversion for my yfz450 and the wiriing harness I got doesn't come with one. I need a tether kill anyway so that works out anyway. But does the kill switch wire up the same like the atv one? The atv one is connect one to the red wirer after the stator but before the cdi, and ground the other to the frame. If anybody has one let me know how you did yours. Thanks

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.