Super 06 WR450 - Must See

No replies to this topic
  • FOZZ

Posted February 12, 2006 - 07:50 PM


Well - Hope the title didnt piss ya off but I figured another jetting help post wouldnt attract much attention..

Well I have never jetted a bike but have done alot of research so I think I can handle it - anyway this is what I have put together but I need some help from the guru's..

Model: 2006 WR450
Timing: WR
Main jet: 170
Pilot Jet: 48
Needle Jet: ?
Starter Jet: 70
Pilot Air Jet: 100
Leak Jet: 40
Fuel screw (turns out): Zip Ty ?
Needle model/Clip position: JD ?
Airbox: Snorkel out - Twin Air Power Flow Kit / Bio Oil - Barnumspro Induction Kit
Pipe: Full White Brothers Carbon Pro
Altitude where you ride: 1900 Ft.
Temperature where you ride: 65 - 95

Other: PowerNow Carb Intake System - GYTR AIS Kit - Gray Wire Mod

I got it modded to hell so it should need alot of juice to keep er happy - All the jets are a research guess at best so if you can help me tune it up some I would much appriciate it..

Related Content


100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.