Quiz


16 replies to this topic
  • tmckeown

Posted February 09, 2006 - 11:15 AM

#1

Hi,

I tought a nice quiz would be in place :thumbsup:

What is this :thumbsup:

http://i31.photobuck...wn/0107c9e2.jpg

Does this give you any help :bonk:

http://i31.photobuck...wn/cbfd9c72.jpg


Timo Mc

  • gobigblue

Posted February 09, 2006 - 11:19 AM

#2

what is it? it doesn't look good whatever it is..

  • Bogieknight

Posted February 09, 2006 - 11:22 AM

#3

Is it for clearing blocked drains?

  • Bogieknight

Posted February 09, 2006 - 11:23 AM

#4

Do I get a prize if I'm right? I think I am.

  • Flaminchiten1967

Posted February 09, 2006 - 11:39 AM

#5

Looks like it is for digging holes in the ground.

If it were for unclogging drains I would expect it to be flexible.

  • tmckeown

Posted February 09, 2006 - 12:08 PM

#6

Is it for clearing blocked drains?


Nope, has to do with motorcycles.

Timo Mc

  • WReckless

Posted February 09, 2006 - 12:11 PM

#7

is it an oil pump drive rod?
or some kind of jetting device?

  • Indy_WR450

Posted February 09, 2006 - 12:15 PM

#8

Must be for drilling the ice tires with studs! After all you live in the Ice Racing capital of the world! :thumbsup: :thumbsup: :bonk: :bonk: :eek: :p :eek: :lol: :p :worthy: :worthy:

Posted Image

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tmckeown

Posted February 09, 2006 - 12:16 PM

#9

is it an oil pump drive rod?
or some kind of jetting device?


Nope :thumbsup:

Timo Mc

  • tmckeown

Posted February 09, 2006 - 12:18 PM

#10

Must be for drilling the ice tires with studs! After all youlive in the Ice racing capital of the world! :bonk: :bonk: :eek:

Posted Image


Indy you're so good :thumbsup:

It is actually a selfdrilling stud that doesn't even need a hole for itself, second picture is mounting device for it so you can use normal dril to screw it in :thumbsup:

Timo Mc

  • Indy_WR450

Posted February 09, 2006 - 12:20 PM

#11

That is a cool way to whip up a studded tire! How fast can you do a new tire with studs this way? :thumbsup:

  • Asgeir

Posted February 09, 2006 - 03:07 PM

#12

Where can we buy such ?

Do you need to glue it in ?

  • Gadsen

Posted February 09, 2006 - 06:42 PM

#13

Jack screw from a MD80?

  • SpeedBlitz

Posted February 10, 2006 - 06:27 AM

#14

I'd love to know where you got that from if you don't mind sharing trade secrets!

  • tmckeown

Posted February 10, 2006 - 08:39 AM

#15

Hi,

I just found it from local motorcycle shop. It is a Italian made stud and costs quite much, almost a $1 per stud. People who tried bike with these studs say it is not even close to "real" studed tire but definately better than without.

Biggest use for this would be during a long enduro race in snowy conditions were you have to drive some asphalt when you lose some studs you can put some new one in those holes just with drill.

Timo Mc

  • SpeedBlitz

Posted February 10, 2006 - 02:24 PM

#16

So this is an actual stud. My misundertanding. I thought it was a coring tool used to "core" holes in the tire into which you insert the studs with a stud inserting tool (e.g. Bruno Wessel or other).

  • roostboy wr250f

Posted February 10, 2006 - 03:26 PM

#17

ITS AN ICE SCREW DUH :thumbsup: :thumbsup: :bonk: :bonk:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.