What do you think of the 06 YZ450F?


35 replies to this topic
  • shigbie

Posted January 21, 2006 - 09:42 AM

#21

6200 OTD????

I don't believe it...where did you buy it?

  • DBH

Posted January 21, 2006 - 10:34 AM

#22

Best bike I've ever ridden. Throw away the front tire, set the sag, put a good chain/sprocket set on, and go win races. Regardless of what some of the magazines say, if you can't win on this bike, you couldn't win on any of them. It's smooth, it's fast, it feels light, and won't wear you down. And you won't be doing the valve adjustments on this one compared to other 450's.

  • yamahaboy99

Posted January 21, 2006 - 11:13 AM

#23

6200 OTD????

I don't believe it...where did you buy it?


Im a rider for a shop in pennsylvania.

  • debounce

Posted January 21, 2006 - 02:40 PM

#24

I just got back from riding and WOW, this thing is just about perfect. It handles and feels as light as my CRF250, has more power than you will ever need, and the suspension is GREAT. I cased a 65' double and it didn't slow me down at all. The only complaint that I have is that the front end will push in some turns. I think a set of high bars or risers will fix that though. It also has no vibration at all, and I wasn't getting any arm pump.

  • skthom2320

Posted January 21, 2006 - 09:25 PM

#25

...but it looks like there is a lot of maintenance involving the valves, water pump leaks, clutch basket, fork stops, frequent piston ring replacement. Don't get me wrong you CRF450 owners. I think the bike is awesome, but I don't like to spend a lot of time on maintenance, and I don't have excess money to spend on parts.


Just my two cents to debunk the myth that every CRF is a money pit.

I've been riding and racing my CRF for two years and all its needed is clean air filters and clean oil.

  • Satch0922

Posted January 22, 2006 - 05:13 AM

#26

you know that is true. I have seen some CRF owners that have a failure of some sort everytime they ride it seems and then others ride the crap out of them. Let's face it...these are racing bikes ...not maytag washers.

  • debounce

Posted January 22, 2006 - 07:36 AM

#27

Just my two cents to debunk the myth that every CRF is a money pit.

I've been riding and racing my CRF for two years and all its needed is clean air filters and clean oil.

Same here, I have been riding my CRF250 for 2 years, and it hasn't needed anything but oil and filters. The valves did finally get out of spec and I'm sending the head off off to Eric Gorr. I think the reason the valves go out of spec so fast for a lot of people is because they are always riding right on the rev limiter the entire time.

  • Ga426owner

Posted January 22, 2006 - 07:39 AM

#28

Same here, I have been riding my CRF250 for 2 years, and it hasn't needed anything but oil and filters. The valves did finally get out of spec and I'm sending the head off off to Eric Gorr. I think the reason the valves go out of spec so fast for a lot of people is because they are always riding right on the rev limiter the entire time.


Bingo! 250F is notorious for this :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Satch0922

Posted January 22, 2006 - 08:50 AM

#29

you should contact Ron Hamp http://www.ronhamp.com/ he us on to something intersting regarding the Honda valve issues. It appears that the heads are machined differently (often even with the same bike) and where the spring sits in the head are different (not accurate) depth. So what may be happening is that it puts more load on the valve spring (because the spring is in a tighter position) and this was putting like 70lbs of pressure on the valves....hammering the crap out of them. He can be more specific but apparently he started measuring the heads and found them to be inconsistent in the way they are machined.





Same here, I have been riding my CRF250 for 2 years, and it hasn't needed anything but oil and filters. The valves did finally get out of spec and I'm sending the head off off to Eric Gorr. I think the reason the valves go out of spec so fast for a lot of people is because they are always riding right on the rev limiter the entire time.



  • debounce

Posted January 22, 2006 - 09:34 AM

#30

you should contact Ron Hamp http://www.ronhamp.com/ he us on to something intersting regarding the Honda valve issues. It appears that the heads are machined differently (often even with the same bike) and where the spring sits in the head are different (not accurate) depth. So what may be happening is that it puts more load on the valve spring (because the spring is in a tighter position) and this was putting like 70lbs of pressure on the valves....hammering the crap out of them. He can be more specific but apparently he started measuring the heads and found them to be inconsistent in the way they are machined.

Well after 2 years, my exhaust valves are still in spec and my intake valves are .003 left .001 right. What would he do to the head, and how much would it cost? I'm sending my head to Eric Gorr tomorrow for a stage 3 kit.

  • RAMARION

Posted January 22, 2006 - 10:25 AM

#31

Too much................... 7,199.00

but I would of spent $1k more for this bike.......... :bonk:

best bike I've ever rode........... :thumbsup:

  • debounce

Posted January 22, 2006 - 11:26 AM

#32

Too much................... 7,199.00

but I would of spent $1k more for this bike.......... :bonk:

best bike I've ever rode........... :thumbsup:

Then you should go to Britt's Motorsports in Wilmington, NC. They tried to get us to pay $8,800 OTD.

  • 97chevy

Posted January 22, 2006 - 02:47 PM

#33

I just got back from riding my friend's 06 on the ice. That thing just rips! It is a night and day difference from a 05 yz250f. I mean 4th gear wheelies under hard accelleration. Its crazy. I want one for sure. We took some video of it, I might try and upload it in a couple of days.

  • cms_austx

Posted January 22, 2006 - 08:16 PM

#34

It's really hard to fault....last year when I bought my YZ250, I didn't even consider the 450 b/c I hated the way they felt so much. Still love my 250, but I have to admit the '06 450 is prob. the best MX bike I've ever ridden.

I'm not doing as much MX these days though, so I bought a 450 XC instead!

  • sbrown

Posted January 23, 2006 - 12:44 PM

#35

I have ridden mine twice and one of the rides was a race. The MXA article wasnt overstating the truth. This is the best bike I have ever ridden. It instills incredible confidence and stock it is incredibly fast. The suspension stock is better than my revalved 04 450F. I'm happy. I don't think you can miss except that most of the Yamaha dealers are not very willing to deal.

If you get one, I really don't think you'll reget it.





'

  • black_n_blue_thumper

Posted January 23, 2006 - 01:34 PM

#36

I took my 04 WR 450 and my new YZ 450 down to some huge hills in Wyoming yesterday. WOW. I tried a hill on my WR four times and never crested it, and I am very comfortable/confident on that bike. The first time I tried it on my YZ I crested with ease. Unreal. The power and control on this bike is amazing. I just cant get over how small and light it feels, making it so controlable. A very fun little side note is how easy it is to ride wheelies on. Pull one up in 4th and ride it out. Good times. :thumbsup:





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.