seems like the most common jetting issue that comes up are pilot circuit related.the following is a sure method to choose the needed changes.

with the bike warm and idleing turn the fuel screw in till the idle drops/misses.then go back out till the idle peaks/smooths.

this should happen between 1 and 2.5 turns on a fcr carb and 1 and 3 turns on a cv.

if you end up at less than 1 turn you need a smaller pilot jet.more than 2.5 (or 3 turns on a cv) you need a bigger pilot jet.

choose the appropriate size and retest.