Jump to content

Where is this damn grey wire at?


Recommended Posts

I want to cut the grey wire and have the bike torn apart. I cant find a grey wire anywhere. The only one I see comes out of the CDI and down the right side of the frame and right befroe the carb branches out of the main loom and starts its own loom with a black wire. This is short and comes to its own plug for disconnecting. Is this it? Where is this bad boy, does it go to the CDI or the stator??? Thanks...

Link to comment
Share on other sites

IF YOUR BIKE IS A 05 OR NEWER TAKE OFF THE SEAT & TANK ,AT THE TOP OF THE FRAME THERE SHOULD BE A SIX WIRE PLUG THE GREY WIRE IS IN THIS PLUG . BE SURE TO CUT SO THERE IS A LITTLE EXTRA ON EACH END AND TAPE THE ENDS REALY WELL. DON'T PULL THE WIRE OUT BECAUSE IT KEEPS THE OTHER WIRES FROM GETTING WET. :applause:

Link to comment
Share on other sites

As I understand it all USA WRs have the grey wire. My 98 WR had the grey wire in the two pin connector. I pushed the pin out of the connector, folded it back and taped the wire and connector to protect it from water.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...