Throttle Stop on Euro model
Posted September 06, 2001 - 04:51 AM
Posted September 06, 2001 - 05:29 AM
I HAVE A EURO WR400 Y2K MODEL,THE THROTTLE STOPS ARE THE SAME AS THE YZ TYPE ( THE SHORTER APPROX 23MM TYPE ). IF YOU DON'T KNOW
IT'S AT THE REAR / RIGHT HAND SIDE OF THE
CARB AND SCREWS UP FROM THE BOTTOM . YOU CAN
REMOVE IT BY JUST REMOVING THE HT LEAD COIL
FROM WHERE IT MOUNTS ON THE FRAME , THIS
WILL GIVE YOU BETTER ACCESS .
I'M 99% SURE THAT I'VE READ SOMEWHERE ON THE
FORUM THAT THE 426'S ARE THE SAME .
I ALSO REMOVED THE RUBBER INTAKE BOOT FROM THE REAR OF THE CARB , OPERATED FULL THROTTLE
TO SEE THAT THE SLIDE DOES GO ALL THE WAY UP TO FULL THROTTLE.
HOPE THIS IS OF SOME HELP
JOHN PORTSMOUTH ENGLAND
Posted September 06, 2001 - 06:20 AM
Posted September 11, 2001 - 09:40 PM
Originally posted by Stefe9999:
Do the 01 WR426 Euro models have the throttle stop? Looking at the archives, this looks mainly like a US thing.
hi,i've got the same bike as you and i had a throttle stop on mine.Removed it much faster now.(jake in sussex)
Posted September 11, 2001 - 03:25 PM
Don't think I need the mod.
Posted September 11, 2001 - 05:42 PM