Stock fork spring rate on 05 YZ450?


5 replies to this topic
  • dvn

Posted December 31, 2005 - 04:55 AM

#1

I'm looking at buying some used fork springs. What is the stock spring rate on a 2005 YZ450?

  • Matt96xr6

Posted December 31, 2005 - 08:31 AM

#2

Let me give you a few links:

http://www.yamaha-mo...parts/home.aspx

That is the online fische. You can look up the part number in the front forks, find the springs and the rate is listed there.

ALso, Racetech list spring rates:

http://www.racetech..../searchdirt.asp


Either way, that will give you info so you can do a bit of research to help answer your questions.

  • Reyndogg

Posted December 31, 2005 - 10:44 AM

#3

I have a Ti stock shock spring and stock fork springs from my 06 if you're looking ... just a couple break in rides on them both.

Fork springs .470 kg/mm
Shock Spring 5.5 kg/mm

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ACE_269

Posted December 31, 2005 - 11:43 AM

#4

I have interested in kowing where my bike stands on suspension numbers too. Turns out , on Racetech website, it says my 05 yz450 it comes w/ .460 kg/mm fork springs , and it recommends ( w/ my weight @ 210 lbs) .466 kg/mm so it looks like I'm set. no need to buy fork springs like I had to on my 98 KX 250. Thanks for the 411 guys.

  • dvn

Posted December 31, 2005 - 06:44 PM

#5

Once again, Race Tech's website is wrong. The stock spring rate on the 05 450F is .45kg.

  • Matt96xr6

Posted December 31, 2005 - 11:00 PM

#6

Once again, Race Tech's website is wrong. The stock spring rate on the 05 450F is .45kg.


I would love to know how you know this.

First this is what is listed for the stock Yamaha P/N and spring rate:

5XD-23141-N0-00 .SPRING (K=4.5N/MM)


THis is what Racetech list:

Stock Fork Spring Rate (measured) .460 kg/mm (stock)

Obviously they are using different scales of measurement, so you have to do the conversion there to compare. Second, Racetech is giving you their MEASURED stock spring rate, not what is listed.

So unless you have measured the spring rate of a stock spring, I would tend to trust the racetech that they actually measured the unit.





Related Content

Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.