03 450 updated, yeah!


No replies to this topic
  • Matt96xr6

Posted December 28, 2005 - 09:18 PM

#1

So I got in trade for some work a set of 250F 2005 Kayaba TC forks. Long story, but yeah. Got those on the 450 with some optional springs:

1C3-23141-80-00 SPRING (K=4.7N/MM)

And installed some homemade 7mm spring preload spacers. Add some Torco Rff 5wt and the front is back together!

(the rear is already setup with a stiffer spring for 200+lb riders). My buddies bike, or soon to be.

THen installed the GYTR flywheel and 02 426 clutch boss spring parts (all 3) to make it a smooth takeoff.

Just like a new bike again! The TC forks are going to be awesome along with the motor mods to tame the beast down a bit. The 03 is still a kick in the pants on a wide open track outdoors though! RIde report will come sunday!





Related Content

Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  94 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.