YZ 450 front wheel help!!!!!!

2 replies to this topic
  • KVO-TN1-2beat

Posted December 07, 2005 - 09:13 PM


I need a wheel for the front of a 2003 yz 450f. I have bought two off of fleabay and the hubs are too short. Outside surface bearing (this is where the spacers sit when they are properly installed) measurement should be 3.463" but the hubs I have received both measure 2.658" . Point being does anyone have a wheel that will definitely fit the front of a yz450 they will sell?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Matt96xr6

Posted December 07, 2005 - 10:14 PM


Okay, the 02 model year was the first year of the wider hub on the YZ bikes (from the previous 96-01). So 02-05 should use the same spacers.

My guess is you are getting pre 02 wheels. No problems. Find out what year the wheel came from and buy the spacers for the year of that WHEEL. Then things will fit great for you. You could probably just buy spacers off a 2000 model year bike and be good to go actually.

  • aford541

Posted December 07, 2005 - 10:37 PM


if you use the spacers from the 01 wheel they will fit the 02 through 05 the 06 is 2 mm wider yet.

Related Content


05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.