'06 bar risers

5 replies to this topic
  • Jasons

Posted December 05, 2005 - 10:34 AM


Does anyone know where to get bar risers that will fit the stock 06 clamps?

I want to go up about 15mm and forward 5mm if possible. I am considering trying to space the stock clamps up but that would not allow me to move it forward.


  • DPW

Posted December 06, 2005 - 06:22 AM


Does anyone know where to get bar risers that will fit the stock 06 clamps?

http://brpit.com/ call them...$65 or so

  • Jasons

Posted December 06, 2005 - 09:12 AM


Thanks guys.
Those risers look nice, the 06's have removable mounts so I will probably go with one piece mounts like the BRP or space my stock mounts up. I would rather minimize the number of pieces involved. They look like they would work very well on a fixed mount clamp.
Thanks again,

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • aford541

Posted December 08, 2005 - 09:30 PM


I was thinking that I would take some 1.5 inch aluminum stock, cut some 5 mm thick washers, buy a longer bolt and let her ride.

  • Jasons

Posted December 09, 2005 - 11:55 AM


That is what I am going to try first. Let me know how it works if you get to it soon.

  • Trick WR

Posted January 10, 2006 - 08:25 PM


I have done a lot of buisness with BRP, they are excellent! Also, a lot of guys that work there are tall, several of them are over 6 foot. They were a big help in getting me set up with the right triple clamp/riser/bar set up for my frame (6'2). I would use them if at all possible. Great Guys!

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.