Stator Rewind???


2 replies to this topic
  • slopoke

Posted December 03, 2005 - 12:28 AM

#1

has anyone rewound their stator themselves??? i'm in the process of building a street tard out of my 426...i did a search on the stators and i found one post about rewiring it yourself..i've wound stators before, it was just on a 50...has anyone done this on the yamaha yet?? is it difficult?? it is a four post stator correct?? are all four posts wound??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • slopoke

Posted December 07, 2005 - 02:39 PM

#2

???? well, i think i've seen the stock stators online...they're four post and they're all wound?? but the electrex stator just uses two for lighting and two for ignition?? is this impossible to do the conversion on the stock stator?

  • 02YZ426

Posted December 07, 2005 - 05:37 PM

#3

The stock stator is a 4 post... and its completly wound for iginition, so I doubt you can modify it. I have the one from Electrex USA and it uses 2 posts for lighting and 2 for ignition. If you have to buy a new one, I would reccommend getting the modified WR flywheel and stator. It puts out twice as much voltage as the Electrex USA model.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.