Dry carb on '05 wr 450

3 replies to this topic

Posted November 24, 2005 - 10:12 AM


I tried to start my wr after months of sitting, nothin. So I drained out the gas in the carb but the carb wont re-fill. I seem to have a good flow from the tank but the carb wont take it in. &%$#@!?

  • toyota_mdt_tech

Posted November 24, 2005 - 11:02 AM


Setting dry can lead to "oxidation" and things can stick. I suspect you have a needle stuck in the seat or float stuck in the up position. Usually, a small wrap on the lower part of the carb will set it free. But some disassembly may be required.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WR450F_RDR

Posted November 24, 2005 - 11:11 AM


the other thing to look at is something simple like an air pocket in the line, try loosening the drain bolt at the bottom of the carb to see if the fuel flows.

  • ARin

Posted November 24, 2005 - 12:13 PM


float stuck?>


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.