Which stainless front brake line to get???

12 replies to this topic
  • flintlock28

Posted November 24, 2005 - 10:05 AM


I want to replace my stock 2004 Yz 450f front brake line with a stainless aftermarket for less sponginess from the stock line. I had heard Galfer's are really nice, but some people say their fittings are weak, and prone to damage.

What other brands are recommended?? and is the CR style worth going to, or is it a unnecessary modification??


  • jamieyz426f01

Posted November 24, 2005 - 10:33 AM


i have a venhill standard length and routing front hose it works awsome, and the fittings are holding up well. :applause:

  • ncmountainman

Posted November 24, 2005 - 10:42 AM


ride engineering makes a nice one :applause:

  • flintlock28

Posted November 24, 2005 - 11:25 AM


Thanks for the replies guys, I will check them out....


  • aedwards07

Posted November 24, 2005 - 12:33 PM


I have the Galfer on my bikes.You mid as well get the CR style since your replacing the line.

  • Ga426owner

Posted November 24, 2005 - 07:04 PM


Fastline & Galfer both are fine

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Matt96xr6

Posted November 24, 2005 - 08:33 PM


Dont buy a Galfer or Russel line. The fittings will break off the line. First ride broke a Galfer line and I did not even fall on the brake side!

Get a Fastline. It has the best fittings, much like the OEM units. WB sells them.

  • RCannon

Posted November 25, 2005 - 05:36 AM


Matt, I agree 100 percent. The Galfer line has weak fittings. Ride Engineering was cool about and offered to fix my line for 30 bucks. I declined. Mine broke when my arm bumped into it for crying out loud. The Fastline replacement has been through hell and is still working fine.

  • drzetard

Posted November 25, 2005 - 01:40 PM


Moose brake lines are made by Venhill and work well for me so far.

  • flintlock28

Posted November 25, 2005 - 02:58 PM


I'm leaning toward getting this "kit" so I have everything I need, and won't have to retro-fit anything.....


What's your opinions on this setup???

Does anyone know of a cheaper site for the same product??



  • Just034

Posted November 25, 2005 - 06:13 PM


I bought the MSR from rocky mountain for 47 buck but when you open it up it says Galfer on it so it looks like Galfer subcontacts it out to MSR. I was pleased with the price and very pleased with the better performance.

  • Pincushion

Posted November 25, 2005 - 06:25 PM



  • bmeador

Posted November 26, 2005 - 07:27 AM


Dr.D makes a good line has good fittings and haven't had a problem with the 4-5 lines Ive had. :applause:

Related Content


Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.