No replies to this topic
  • Nodrog

Posted October 26, 2005 - 05:56 AM


Hi Guy's -
New to your site - Must congratulate all the members for all the contributions and advise - It really comes in handy when you pick up problems with the scoot .I currently ride a 99 Model WR 400 and recently replaced the cam chain , as it kept jumping teeth on the cams (lovely Noise it makes) - On doing this , I played around with the cam timing and got some awesome results by Moving the inlet cam clockwise by one tooth and keeping the exhaust cam in the standard position - Has anybody tried this previously and had the same results - Please advise - I think the norm is to move the exhaust cam 1 tooth clockwise for better performance andkeep the inlet cam in standard position .
Nodrog .


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.