Jetting for WB E series Pro-meg Silencer

2 replies to this topic
  • 150 Fuelie

Posted October 24, 2005 - 05:41 PM


I just picked up a WB E series Pro-meg on ebay, over the weekend I removed the air pump and snorkle in the airbox added a Uni filter and went with a 158 main jet 55 slow. Am I jetted rich enough for this slip on?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • justicedone

Posted October 24, 2005 - 07:43 PM


should be good to go, after aprox 2.25 turns out on the screw.


  • 150 Fuelie

Posted October 24, 2005 - 07:48 PM


Thanks. It's starting to get cold here in Michigan so I'll just throw the pipe on for now to see how she sounds and dial it in this spring if need be.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.