running rich


8 replies to this topic
  • Tom81

Posted October 21, 2005 - 12:53 PM

#1

My R is jetted as follows, 175, 68s, b53e in 3rd pos. Fully uncorked airbox, no holes in cover and WB E2 exhaust w/o spark arrestor installed.

But it is running too rich, maybe I need to go with smaller jets, or maybe just make som holes in the airfilter cover???

or just go with that Mikuni carb. and get it properly jetted?? :banghead:

But for now, what your opinion on that jetting/holes in cover question??

Thanks

  • XRMANU

Posted October 21, 2005 - 01:28 PM

#2

what color is your sparkplug?

Make the holes in the panel and add a free-flowing airfilter and screen :banghead:

And than later ...buy the Mikuni :lol:

You can make the stock carb work nice and smooth,i did one last week.A XR650r from 2000:stock motor,handmade headers + Leo Vince carbon can from a Fireblade,open airbox with Twinair filter and screen with jetted OEM carb ..an easy 165/170 km/u on his Sigma computer :banghead:

  • Tom81

Posted October 21, 2005 - 01:41 PM

#3

heh.. thanx... forgot to mention, I already got the Twinair filter+ screen.

  • XRMANU

Posted October 21, 2005 - 01:46 PM

#4

check the plugcolor..this setup seem nice for those mods.But...I alway use a 70S pilot with a Twinair and race can .

What goes wrong? Lowend power?

I used (on the last bike) a 70S and a 192 main ! But his headers are really very big,just like the endcan stinger (diam 50/55 mm or so) + allot of holes in the sidepanel.Nice brown plugcolour with this setup :banghead:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • XRMANU

Posted October 21, 2005 - 02:09 PM

#5

His vented sidepanel on my bike...

Posted Image

  • Tom81

Posted October 21, 2005 - 03:31 PM

#6

that's a nice header... where'd you get that??

do you know about ABP-racing??

  • XRMANU

Posted October 21, 2005 - 11:20 PM

#7

The exhaust is not from ABP,it's an EVO ,Swiss made .From www.Monnier.ch
800 a 1000 euro for the complete system.

I removed the heatshields from the headers.It looks nicer,so :banghead:

CRD headers (French made) are also very good.

  • Tom81

Posted October 22, 2005 - 03:58 AM

#8

Okay.. Do you know about the product quality from ABP??? I've been thinking about buying parts from them

  • XRMANU

Posted October 22, 2005 - 04:52 AM

#9

Abp is OK , I think.





Related Content

Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  158 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 8 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.