03 WR450 australian wiring Diag.


No replies to this topic
  • duke2au

Posted October 13, 2005 - 03:49 PM

#1

I am looking for a australian / NZ wiring diag for my 450. I picked up the bike second hand and niticed that all the electrics have been taped up behind the headlight. I took the tape off and discovered a really bad wiring job. Apparently the indicators were taken off right from new, and there is a polisport headlight on there. I can see that there are the left and rear indicator wires, but when I plug in the actual indicators I get nothing... The Kill switch, headlight, starter (tries to go) all work.

where do you think I should start looking?
BTW I allready have the US version of the manual, but there is no mention of the indicator lights.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.