EZ FMF Silentcer Fix

No replies to this topic
  • verge

Posted August 18, 2001 - 07:01 AM


I found an easy and fast way to straighten a bent FMF Power Core 4 (non-spark arrestor). I happened to have a 7 foot section of 1 1/4 inch square metal tubing laying around the garage. First i used it to straighten the sub frame. Then i noticed that it slips perfectly into the square bore of the silentcer. With 1 or 2 small tugs i straightened a fairly tweeked silentcer. It sounds like caveman engineering but it was fast and didn't hurt the inside fo the pipe!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.