cutting out


6 replies to this topic
  • newthumper05

Posted September 28, 2005 - 03:53 AM

#1

WR450F 2005 Finally got to 5th gear about half throttle, starting cutting out, otherwise bike runs great. Anybody know why this is happening, maybe some of you street legal guys have experienced this?

  • Dodjy

Posted September 28, 2005 - 03:54 PM

#2

Could be running rich so try lowering the needle one or two clip positions (raise the clip on the needle).

  • newthumper05

Posted September 29, 2005 - 04:14 AM

#3

After doing a search I think it is the tps causing my revving problem

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Brettv

Posted September 29, 2005 - 06:25 AM

#4

i agree the tps will do it in 5th under a steady throttle, try disconnecting it and see how it goes

  • Dodjy

Posted September 29, 2005 - 06:23 PM

#5

How does the TPS affect onlt 5th gear?

  • Brettv

Posted September 29, 2005 - 06:39 PM

#6

its the most noticeable because in 5th the engine is under the most load, at a steady throttle, do a search, they did a dyno, and found out it was the tps.

  • Matty05

Posted September 30, 2005 - 04:25 AM

#7

I ride mine high speed all the time, I don't experience any cutting out or surging.
I have not touched the tps at all.

My guess if your needle is in the wrong position.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.