Does wr426 rear fender fit wr450?

3 replies to this topic
  • jonrichert

Posted September 27, 2005 - 06:31 PM


Hi guys, just cracked my rear fender on my 03 wr450. I spotted a fender on ebay for a wr426 and was wondering if it would bolt up. Thanks for any input


Posted September 27, 2005 - 07:40 PM


I don't think so...... I thought the 400 and 426 were the same and I know for sure that my 400 fender will not bolt up to my 450.

89% sure........ :banghead:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jonrichert

Posted September 27, 2005 - 09:38 PM


ok thanks, i guess i'll just go to town on it with nylon zip straps for now.


Posted September 28, 2005 - 07:30 AM


Unless you are really att'd to the tail light, you can get a YZ fender (400 or 426), pretty cheap and that will bolt up. There is a little trimming around the coolant overflow resevoir but it's pretty basic and looks pretty good!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.