06 WR450F Front Disc Guard


11 replies to this topic
  • Leeisfishing

Posted September 24, 2005 - 03:41 PM

#1

Anyone know of a front disc guard that will fit an 06 WR450F. I ordered this UFO one (WB_511450) from the store here which was suppsed to fit an 05 and the 2nd hole is not even close to being lined up with the caliper bolt hole.


A guy from the Thumper Store said....51-1450, - It should. I'm 99% sure, as it fits the 05 WR450F and there are no real changes for 06.

  • tony1970

Posted September 24, 2005 - 07:08 PM

#2

I posted this question a few weeks ago and I was told Cycra will be coming out with one for the '05 soon. Have not seen it around yet. Anything that fits prior to '05 will not fit an '05 so I would guess it would not fit an '06. Unless it is because of that worthless new computer you have on the bike. Take it off and I will gladly buy it off you. :banghead:

  • clark4131

Posted September 24, 2005 - 08:26 PM

#3

Topar makes a front disc guard for the '05/'06, but it's not like the Cycra. It's a billet aluminum deal, very similar to the shark fin for the rear and mucho dinero. Also, Rooster makes one, but I wasn't too impressed with their design. It looked a little flimsy to be honest...SC

  • Leeisfishing

Posted October 14, 2005 - 10:21 AM

#4

I rather not do metal. Just looking for a plastic guard. Anyone find one for an 06?

  • oldbones

Posted October 14, 2005 - 10:31 AM

#5

I run the Rooster disc guard, front and rear, and there is nothing flimsy about it. Trust me, I have crash tested, stump tested, log tested, & rock tested these guards, and they hold up fine.

  • Stinez

Posted October 14, 2005 - 10:37 AM

#6

I hope the Acerbis one fits. I was told it would.
:banghead:

:banghead:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SteveWR450F

Posted October 14, 2005 - 01:35 PM

#7

I will second that Rooster makes nice disc guards. I run a Zipty sharkfin in the back and rooster disc guard in the front. I have smacked a few rocks pretty hard and it never bent. What I like about the Rooster or other metal designs is that they dont clog up with mud like the plastic designs do. Probaby just a matter of preference but I think rooster makes some nice stuff that works. Just my two cents . . .

Steve

  • clark4131

Posted November 01, 2005 - 09:16 AM

#8

I just got an update from Cycra and was told that the guard for the '05+ will be ready in a couple of weeks...SC

  • Leeisfishing

Posted March 13, 2006 - 07:54 PM

#9

Still no plastic ones out?

  • David37

Posted March 13, 2006 - 08:21 PM

#10

Have you checked with Acerbis plastic?

  • BajaFool

Posted March 14, 2006 - 12:50 PM

#11

Acerbis Spider Evolution Front Disc Guard fits my 2006WR. Looks good and does the job. They are hanging on the rack at Motoworld. The Acerbis Spider Universal Front Disc Guard DOES NOT fit the 2006WR.

  • Few

Posted March 14, 2006 - 02:02 PM

#12

I bought the Acerbis Spider for my '06 instead of an aluminum front disc guard. The aluminum guards supposably rattle and I like to stay stealthy.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.