Oil smoke from crank case vent


1 reply to this topic
  • onelugnut

Posted September 22, 2005 - 07:41 PM

#1

I am getting a lot of smoke from the vent,I moved the vent under the tank and put a filter on the end of the hose along time ago and have not had any smoke until now.
Is it time for a new piston and rings?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Rich_in_Orlando

Posted September 23, 2005 - 05:12 AM

#2

Unfortunately, yes.

Same thing happened to my bike last year. I honed the cylinder and put in new rings but it was just a temporary fix. The ring gap was was barely within specs. A few months later I replaced the piston and cylinder. I didn't realize how down on power it was before I replaced the parts but after that it ran like a new bike.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.