Rear disc conversion


1 reply to this topic
  • kdtg

Posted September 18, 2005 - 12:06 PM

#1

How difficult is it to swap rear drum brakes on a 1988 XR6 for the later disc system? Also what about the cost? I have found a 1988 XR6 with "tranny noises" that i can pickup for probably $600-$700. But i would prefer to have rear disc.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • thouk

Posted September 18, 2005 - 12:36 PM

#2

Kdtg,
I did it to my 86 600r. I used a wheel from a cr 125 or 250 I think. I just made a bracket that help the caliper from rotating around. I have the setup for sale if you would want it relatively cheap. You would need to get the the caliiper and hose and master cylinder but I have the wheel and disk. Hope that helps, Tony





Related Content

Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  158 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.