Rear Tire size?


4 replies to this topic
  • malevolent73

Posted September 02, 2005 - 09:30 AM

#1

Is anyone running a 120/100/18 on there pig, and if so, how does it fit? Does it clear the swingarm, and chain w/ no problem?

  • xrdad

Posted September 02, 2005 - 07:26 PM

#2

It fits just fine. I mounted a Kenda K760 Trakmaster II 120/100-18 last night. Got it on on the first try, no pinched tube or anything. I'm running a 15-45 sprocket set with a 110 link chain, so my axle is pretty far back in the swingarm. The tire clears on the brake side by about 3/4" and over 1" on the chain side. It rides smooth and quiet on the highway too. It did raise the seat height a bit, about an inch or so due to the taller profile of the tire. Not a problem as I'm 6'7" 250lbs. Rocky Mountain ATV/MC has them for $37!
(www.rockymountainatv.com)


Ted K.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Supplicate

Posted September 02, 2005 - 08:51 PM

#3

I run 120/100/18 Maxxis Desert ITs currently. They are a bit of a squeeze to get them in, but once bolted up fit fine.

  • tpvet73

Posted September 03, 2005 - 11:01 AM

#4

I'm running the Kenda Enduro 140/80/18 without any clearance problems. It is one fat tire.

  • dennisthe

Posted September 03, 2005 - 05:10 PM

#5

Have a Dunlop 739 AT 120/100-18 with 13/50 sprockets and 110 link chain. Fits fine with just a little rubbing on the mud flap, but its beat-up too.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.