registration plate holder

12 replies to this topic
  • poffer

Posted August 31, 2005 - 09:10 AM


I'm looking for a license plate holder, anyone who knows where I can get on? Company must ship overseas (I'm from Norway)

  • poffer

Posted August 31, 2005 - 01:34 PM


like this: http://www.ahmaclaug...ateHolder2.html

anyone? please...

  • bg10459

Posted August 31, 2005 - 01:52 PM


Check this thread.
Mine is by far the best one out there :D

  • luke_n

Posted August 31, 2005 - 07:52 PM


Posted Image

The big hole just allows the bolt from the taillight to poke through. Light hooked up to make it semi legal.

  • bfly

Posted September 01, 2005 - 05:47 AM


What I have (The licence plate gets bent very easily with this one):


What I should have gotton:

  • bg10459

Posted September 01, 2005 - 05:54 AM


Unfortunately, anything you put under your fender is going the get trashed. I mounted my plate on a piece of 1/4" neoprene rubber to minimize the destruction.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • poffer

Posted September 01, 2005 - 09:45 AM


Thank you all for the answer!!

  • Frostbite

Posted September 01, 2005 - 10:35 AM


I strap mine to the front number plate , never really had to worry about someone coming up behing me.

  • Joe Reitman

Posted September 01, 2005 - 07:51 PM


I fabbed one out of sheet metal. UnfortunateLy too many stoppies bent it down a little due to weight of turn signals combined with rear end dropping back to earth. So I moved it forward for a shorter distance between signals and mount, and spot welded up the stress crack that was starting, and used a fender washer at the rear mount to distribute the stress better. Took some pics tonight and will post tomorrow.

  • skidxr

Posted September 02, 2005 - 07:08 AM


I strap mine to the front number plate , never really had to worry about someone coming up behing me.

Man just looking at your pic is making me cold!!

  • Joe Reitman

Posted September 02, 2005 - 09:03 AM


Please click for larger version. I will try to get a good photo of underside tonight.

Posted Image

The signals have yellow LED's. The tail light also has brake light activated via momentary switch.

Cost of this setup is very cheap- some scrap sheet metal, a short length of 1" schedule 80 behind holder to clamp signals on.

  • Joe Reitman

Posted September 06, 2005 - 12:18 PM


Posted Image

Note the (sloppy- it was late) weld repair of stress crack due to too much overhang originally- plus too many stoppies :D

  • Joe Reitman

Posted September 06, 2005 - 12:20 PM


Here is another view. This is a simple and effective and very cheap way to go...

Posted Image


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.