What do you think of

5 replies to this topic
  • needsprayer

Posted August 23, 2005 - 04:24 PM


these freehand graphics? The drops (of blood) are intentional. There were some problems with bleeding of the tribal XR letters when the clear coat was applied. Just temporary anyway.

They are different (left vs right hand side). I like the left hand side best and plan to have decals made from a template.

Left hand side:
Posted Image

Posted Image

Right hand side:
Posted Image

Posted Image

  • Dual_Dog

Posted August 23, 2005 - 07:01 PM


I'd go a little bigger and bolder for the "650" numbering and I'd add the 'R' on there. :D Just an outsider's opinion. :D

Kinda has that custom chopper or low rider look with that freehand pinstriping. Who knows, maybe you'll start a whole new trend in MC graphics! :D

  • JackAttack

Posted August 23, 2005 - 08:34 PM


Needsprayer, put down the crack pipe!

The only pinstriping that should be on a 650R is from the Manzanita and Ocotillo bushes your riding through. :D

Turn off the NASCAR channel and get out there and ride...it's starting to get below 100 degrees in the mornings. :D

PS: I think you could raise those forks in the triple clamps a little more. :eek: :D

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • needsprayer

Posted August 24, 2005 - 05:03 AM


Thanks for the feedback Dual-Dog and JackAttack.

I agree with you Dual_Dog on both points.

I have a Kouba lowering link (requires raising the forks) and the seat is cut down because I am SHORT damn it.

JackAttack you didn't say if you liked the artwork or not. I am going to assume that you did. Sure looks better than a big blocky KTM :D

  • bork

Posted August 25, 2005 - 11:28 AM


The stripes look ok, but the 650 looks kinda like a kid with a pencil quickly added. Just my .02

  • needsprayer

Posted August 25, 2005 - 06:08 PM



You and Dual_Dog are correct, it is lacking in effect. The 650 was not originally part of the design. It became evident that the space needed to be filled in and was quickly done. Next version will address all of the recommedations.

Thanks for the feedback.

Related Content


Can anyone identify this xr600 piston? by ms_mtn24

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies

XR650L super moto wheels by greggkklee

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

FCR40 Tuning Woes- XR600R by aTuWitty

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  37 replies

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker

Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.