any stock fork springs?


14 replies to this topic
  • grayracer513

Posted August 21, 2005 - 04:10 PM

#1

Anyone out there have a pair of original '04 YZ450F fork springs, or an aftermarket pair of .46's?

'04's only please, earlier ones won't work.

Thanks,

  • springmaker

Posted August 22, 2005 - 11:17 AM

#2

We have a pair of aftermarket .46's.
KC
CannonRacecraft.com

  • grayracer513

Posted August 22, 2005 - 11:27 AM

#3

Still looking for stock or used '04 YZ450 springs....

  • waterdog3

Posted August 22, 2005 - 03:46 PM

#4

I have a pair of stock WR450 2004, fork springs. will they work for you?

  • ripntear

Posted August 22, 2005 - 04:38 PM

#5

gray,

I don't have any springs, but I am curious what project you're working on now?

  • grayracer513

Posted August 22, 2005 - 05:51 PM

#6

...but I am curious what project you're working on now?

If you must know, I'm building a huge ball point pen. :D

Actually, I am putting together a set of 48mm forks for my 450, but they came from a YZ250F, so they have .42 springs in them. I need .46's.

  • Jetsprint2

Posted August 22, 2005 - 05:54 PM

#7

If you must know, I'm building a huge ball point pen. :D

Actually, I am putting together a set of 48mm forks for my 450, but they came from a YZ250F, so they have .42 springs in them. I need .46's.

Gray, there is a set of 05' forks on ebay right now if you are interested- I think they said the forks came off of a 450 as well. I just saw them earlier today. :D

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Jetsprint2

Posted August 22, 2005 - 06:19 PM

#8

Gray, there is a set of 05' forks on ebay right now if you are interested- I think they said the forks came off of a 450 as well. I just saw them earlier today. :D

Gray,
Here is the ebay link.
http://cgi.ebay.com/...569991362QQrdZ1

  • grayracer513

Posted August 22, 2005 - 08:22 PM

#9

Well, dang. There was a pair of those up when I bought the '04s, but the guy had a $600 start bid then. Just goes to show patience is a virtue (that I still am a little short of) :D

  • waterdog3

Posted August 23, 2005 - 05:53 AM

#10

I have a pair of 46's out of a 04WR450 that you can have for $20.00. less than 400 miles of trail riding on them. I switched out to a set of 50's

  • grayracer513

Posted August 23, 2005 - 07:04 AM

#11

Were the '04 WR's 48mm or 46mm fork tubes?

  • rmracer27

Posted August 23, 2005 - 04:33 PM

#12

gray,

I have the factory ones out of my 05 450 laying around. I think they are the same as 04's If they are the same let me know and I will make you a deal on those. Send me a PM or something.

Later

  • id250f

Posted August 23, 2005 - 05:02 PM

#13

i've got a pair of stockers off my 05 yz250 (2-smoke) ... virtually no miles on 'em ... not sure if they'd work ... but i got some

  • waterdog3

Posted August 24, 2005 - 07:07 AM

#14

my manual says WR450FS are .46's

  • ncmountainman

Posted August 24, 2005 - 10:52 AM

#15

Were the '04 WR's 48mm or 46mm fork tubes?

o4 wr's were definately 46mm,and any 05 yz will not fit(whole different fork although they are 48mm),only 04 yz,and 05wr :D





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.