Scratch and Dent Pipes

10 replies to this topic
  • ISBB

Posted August 15, 2005 - 06:42 PM


Good bad or in diffrent..

Found a complete DMC kit for the 02 426's for 180 bucks... has a dent in the can? wondering what you guys think...

And its brand new to boot... seems to good to be true... 300 bucks off for a dent.. hmmm

Edited for proper product..

  • MisterMan

Posted August 15, 2005 - 07:12 PM


send some pics...we'll go from there....

  • ISBB

Posted August 16, 2005 - 10:42 AM


Ebay Link


Posted August 16, 2005 - 10:45 AM


Ebay Link

I was thinking...DMZ? C!

  • ISBB

Posted August 16, 2005 - 11:02 AM


ya whatever.. :D
lol... but it looks like the dent is on the bottom most portion of the can closest to the motor... would that effect it in anyway... i wonder if it could be pulled apart and knocked out somehow?? No one would see it since its under neath and all..

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Ga426owner

Posted August 16, 2005 - 11:47 AM


I was never impressed with that pipe............ :D

  • revolucien

Posted August 16, 2005 - 11:58 AM


It looks like the standard dent that comes in stock YZ pipes for tire clearance.

  • ISBB

Posted August 16, 2005 - 12:17 PM


i also found a FMF PC4 i believe for a bit more.. didnt include head pipe... i was thinkin since this is a COMPLETE system including head pipe it wouldnt be too bad of a deal...

  • ISBB

Posted August 16, 2005 - 12:19 PM


FMF PC4 Link

  • 642MX

Posted August 16, 2005 - 04:28 PM


DMC exhausts are fugly. I'd go with the FMF.

  • djbiker

Posted August 17, 2005 - 02:56 PM


i you do an fmf go with a full ti4 system you would be happier and ony like a 150 bucks more than a pc4 full system

best place to get them

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.