Bike stalling with Rekluse clutch?


5 replies to this topic
  • denverdenali

Posted August 13, 2005 - 06:25 AM

#1

I have an 04' wr450 with a Rekluse and whenever I get in techincal stuff the bike stalls. should I adjust the idle screw?? help??

  • ncmountainman

Posted August 13, 2005 - 07:23 AM

#2

i had the same problem,if your pilot jet is too rich it'll do that and if your using the light spring try the heavy one.

  • bigdrtrdr

Posted August 13, 2005 - 11:48 AM

#3

My WR 426 started stalling like that one afternoon, I just turned up the idle speed a smidge and no more stalling.
Checked the idle speed with a tach and it was right on after I turned it up.
To slow before.
Eric

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • byggd

Posted August 14, 2005 - 04:37 AM

#4

I ride from 500' to 5000' so rather than re-jet all the time I bump the idle up

  • ncmountainman

Posted August 14, 2005 - 04:05 PM

#5

forgive me if i'm wrong but i was under the impression that running a high idle to mask a rich condition actually makes it richer :D

  • byggd

Posted August 15, 2005 - 04:10 AM

#6

Not if you turn the idle screw in a little :D




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.