Good bars for YZ450F 2004?


10 replies to this topic
  • davepunc

Posted August 09, 2005 - 04:20 PM

#1

G'day,

I've just recently bent the stock bars that are on my YZ450F, so obviously it's time to replace them. I was wondering what you guys recommend for a good set of bars? And will they fit on the bar mounts?

Reason I ask this, maybe i'm confused, but one of the dealers where telling me that i'm going to have a to get a triple clamp set and this and this and this just to mount some bars?!?!

Got to get some new ones before my ride this weekend!!

  • 642MX

Posted August 09, 2005 - 05:21 PM

#2

I've got Pro Taper bars with the universal clamp adapter. You won't bend Pro Tapers very easily. Trust me, I've tried.

  • undrdog

Posted August 09, 2005 - 05:23 PM

#3

You can get some pro-taper SE bars that are direct bolt on deal. Or any bar of your choice that comes in the seven eighth size. Renthals, are also nice......

  • davepunc

Posted August 09, 2005 - 05:33 PM

#4

cheers, thats for the replies, i was thinking along the lines of Pro Tapers :D

  • saucebox

Posted August 09, 2005 - 06:02 PM

#5

running the renethal fat bars with a universal top clamp.. i've crashed hard many times with them and still strait.. awesome bars.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • flintlock28

Posted August 09, 2005 - 06:35 PM

#6

I second the Pro-Taper SE bars. I think I'm running the rc high bend model (I think that;s what it's called)

  • ride yzf all the way

Posted August 09, 2005 - 07:01 PM

#7

pro taper fat bars with triple clamp their like inpossible to bend

  • JohnB

Posted August 09, 2005 - 08:04 PM

#8

Fasstco Handle bars

  • davepunc

Posted August 10, 2005 - 03:19 PM

#9

I ended up getting some Pro Taper SE's and fitted them last night, they seem like a good set of bars!! I'm sure they'll get tested this weekend, so we'll see how the pan out.

  • mxaction

Posted August 10, 2005 - 06:58 PM

#10

the stock yamaha triple clamps (pre '06) will require you change them out if you hope to mount oversize bars from pro taper, renthal, tag, or whoever else. when i bent my stockers i switched to standard sized renthal aluminum bars and just recently bent them.

take my advice, spend the extra cash on triple clamps that mount oversize bars...it will cost you alot less in the long run. most likely you'd bend another set of 7/8" bars.

  • cheekz

Posted August 11, 2005 - 01:36 AM

#11

TBH iv always use wrp low bend :D so you are over the bars more they have lasted me about 3 years and have hade a fair few smaasing wiv them much better than tapers cauz they feel like u are riding a chopper :D (no joke)





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.