XR650l Gold Valve install help


4 replies to this topic
  • fuct

Posted August 05, 2005 - 11:44 PM

#1

just got my Race Tech Gold Valve kit (#FMGV2040). how do i get to the valves? how do you take apart the damper rods? got my springs in but still trying to figure out the valve thing. any help will be greatly appreciated. thanks in advance.

  • fuct

Posted August 06, 2005 - 06:06 PM

#2

failed to mention this was for the front forks.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • BWB63

Posted August 06, 2005 - 06:31 PM

#3

You need a spanner wrench that holds the dampenning tube assembly from the top. I think for your bike it's the one with the four tits on it. You make it out of 3/4" pipe with a "T" handle one it. Not the same as the XR650R. But, it comes apart the same. You have to remove the spring and the dampenning rod lock nut. Different tools but, same concept as the XR650R forks look on this site for the XR650R
http://xr650r.borynack.com/

  • Rover31

Posted August 06, 2005 - 08:54 PM

#4

I did not do the valve install myself but to put .02 into it use 7.5 weight oil not the 10 as RT says. It made a huge diff in the responsiveness!
Travis

  • fuct

Posted August 07, 2005 - 08:24 PM

#5

Thanks BWB!, will take a good look at the rods tomorrow. may have to order some specialty tools.





Related Content

Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  186 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.