Powercore 4 or Dr. D for 05 WR. Which would you pick?


24 replies to this topic
  • RC81

Posted August 02, 2005 - 11:45 PM

#1

I have narrowed it down to these two and will be ordering this week. What would you go with and why? Both look good.

  • Anthony CRF450

Posted August 03, 2005 - 04:08 PM

#2

i just ordered a FMF powercore4 for mine from ebay. it should be here very soon. i will keep you posted. cost $400US for the full powerbomb titatium system incl shipping to Australia with FMF Jet kit. :D

  • Math

Posted August 04, 2005 - 02:10 PM

#3

My bike breathes sooooo well with the powercore 4 that I can't imagine there is one pipe that fits those high revving yammies better.... It is quite loud but still acceptable.... you can buy a quiet insert if you need to ride in some places where the sound level is an issue. Bolt the isert on or off with only 3-4 screws. Plus, my PC4 has a spark arrester and is light as a feather. I love it.

  • Anthony CRF450

Posted August 04, 2005 - 04:07 PM

#4

Sounds good, i might get those extra bit when mine arrives. does anyone know where to get them from in Australia (any distributors)? i live in melbourne :D

  • RichBaker

Posted August 04, 2005 - 04:13 PM

#5

I'd go with the Dr.D stuff. He is, after all, the man responsible for the YZ-Fs development and knows Yamaha 4-strokes as good as the engineers....maybe better!

  • waterdog3

Posted August 05, 2005 - 05:45 AM

#6

I 2nd the above reply...the Dr.D is "made" for yamaha's.

  • Conan_'dale

Posted August 05, 2005 - 06:09 AM

#7

Dr. D :D Dubach knows the Yammies :D

  • ncmountainman

Posted August 05, 2005 - 06:27 AM

#8

i run the powerbomb/powercore4 i really don't think it can be beat for the price,and i recall seeing a article that tested several different pipes against one and other,DR.D didn't show very well :D

  • Math

Posted August 05, 2005 - 02:32 PM

#9

I 2nd the above reply...the Dr.D is "made" for yamaha's.



I'm sure Doug knows Yamaha bikes very very well. I personnally have DrD aftermarket stuffs on my bike. Nevertheless, if I remember correctly the Powercore 4 was also specially made for yamaha bikes. I've always thought it was developped by FMF based on the 98 YZ400f response.

  • Matty05

Posted August 05, 2005 - 02:51 PM

#10

stick with FMF or Procircuit.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Hamish

Posted August 05, 2005 - 05:15 PM

#11

i just ordered a FMF powercore4 for mine from ebay. it should be here very soon. i will keep you posted. cost $400US for the full powerbomb titatium system incl shipping to Australia with FMF Jet kit. :D

sounds awfully cheap.
whats the ebay store/item number?

  • cgrlvr35

Posted August 05, 2005 - 06:17 PM

#12

Im looking at getting DR. D. Check out the packing. It seems DR. D would be alot easier to repack. Its preformed. With FMF dont you have to wrap and then tape and cram everything back in. I look at that feature also.

  • 426boy

Posted August 05, 2005 - 06:34 PM

#13

yup i got a powercore 4 on my 01 yzf 426 and its pretty sweet

  • nji320

Posted August 05, 2005 - 08:47 PM

#14

powercore, nothing beats it for the money

  • Blaster21996

Posted August 05, 2005 - 09:55 PM

#15

I just put the Yoshimura Carbon fiber on my 05 450, she's got a lot more grunt now!

  • rtrolli69

Posted August 08, 2005 - 09:32 PM

#16

Well ive personally bought the DR D and love the power it brought to my Wr450.I did alot of research and most articles in the mags put the DR D up at the top of the HP ratings and rideable performance.Fit was perfect other than loosening the head pipe to change the oil on the Wr over the stock head pipe.I recommended DR D to a riding buddy with a crf250 if it does for the Honda what it did for the Yamaha he will be happy.oh yeah one more thing the price it was cheaper than the other pipes,hmmn thats the frosting.I would definately buy again...Russ

  • Blaster21996

Posted August 08, 2005 - 09:46 PM

#17

I just put the Yoshimura Carbon fiber on my 05 450, she's got a lot more grunt now!


I raced a KTM LC4 640 and a KTM 450exc today with the new YOSH carbon fiber on. Beat them both, not once, not twice, but 3 times! (drag race 1/4 mile). I did not get the chance for a top speed race, but before I put the YOSH on, I was getting beat by the 450 at 97mph.

  • RC81

Posted August 08, 2005 - 10:31 PM

#18

Well I ended up ordering the Dr. D. I was concerned about the noise of the Powercore and if you have to put an insert in it to quiet it down whats the point. Thanks for the advice and hopefully I will like the Dr. D.

  • the go-devil

Posted August 09, 2005 - 03:19 AM

#19

I see you already ordered the DR D, but I'd like to throw in my 2 cents on my current PC4 SA. The performance is great but it basically has fallen apart. A couple of months after I bought it it developed a crack almost all the way around where the mid pipe is welded to the front of the can. I had a welder who I work with fix it, he filled in the valley around the mid pipe junction and it looked like it would be bulletproof. Well, I went to repack it about a month ago and the crack was back, all along the outside of the weld :D and to add insult to injury the square perforated core had completely broken into two pieces at the midpoint of the can. I've also had a problem with the spark arrestor screen falling apart. What a POS. I'm probably not going to be buying anymore FMF pipes. BTW, I tried the quiet core insert and it was horrible. My WR450 felt like a glorified 250.
I think my next pipe is going to be a Yoshimura Comp series with the TEC insert, it looks like a better design. Anybody have any feedback on this setup?

  • Blaster21996

Posted August 09, 2005 - 07:20 AM

#20

I see you already ordered the DR D, but I'd like to throw in my 2 cents on my current PC4 SA. The performance is great but it basically has fallen apart. A couple of months after I bought it it developed a crack almost all the way around where the mid pipe is welded to the front of the can. I had a welder who I work with fix it, he filled in the valley around the mid pipe junction and it looked like it would be bulletproof. Well, I went to repack it about a month ago and the crack was back, all along the outside of the weld :D and to add insult to injury the square perforated core had completely broken into two pieces at the midpoint of the can. I've also had a problem with the spark arrestor screen falling apart. What a POS. I'm probably not going to be buying anymore FMF pipes. BTW, I tried the quiet core insert and it was horrible. My WR450 felt like a glorified 250.
I think my next pipe is going to be a Yoshimura Comp series with the TEC insert, it looks like a better design. Anybody have any feedback on this setup?


I have a FMF Gnarley on my CR500, it's holding up well. However the Turbine Core 2 silencer is a POS, maybe they are trying to squeeze all the profit out of there products by using cheaper manufaturing methods or something. I will never buy FMF again.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.