Anyone in Southern IL Help with cam mod


9 replies to this topic
  • dirttrack25

Posted August 02, 2005 - 08:08 AM

#1

Anyone from around the Southern IL area with a 426 wanna help me do the 450 cam mod to my bike? My bike is all stock and i want this to be my first mod. i hate the manual decomp. crap. Any help appreciated

  • 642MX

Posted August 02, 2005 - 05:53 PM

#2

What town are you in?

  • freekstyle

Posted August 02, 2005 - 06:51 PM

#3

I grew up in Southern Illinois, Ive been gone for about two years. But if your from the Carbondale Or Murphysboro area let me know. I know the shops and who is good and bad.

  • dirttrack25

Posted August 03, 2005 - 08:30 AM

#4

Im From Enfield about 30 miles east of Mt.Vernon. I do go around carbondale area some, But not often.

  • dirttrack25

Posted August 03, 2005 - 08:30 AM

#5

Where are you at 642MX?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 642MX

Posted August 03, 2005 - 03:28 PM

#6

Where are you at 642MX?




Evansville, IN

  • martybec

Posted October 23, 2005 - 05:18 PM

#7

HI I know it is an old post, but I just found it. I live in Brownsville (Carmi) If you still need help or want to ride sometime let me know. martybeck@netzero.net Thanks Marty!

  • Reckner Racing

Posted October 25, 2005 - 02:49 AM

#8

WE went to a company called HOT CAMS they have a auto decompression exhaust cam and a nice intake cam. We just installed a set in our 426 it was simple. We replaced the timing chain with the cam swap. I am sure someone else is making these cams for the 426 but these are all we could find. We did not have to do any other mods other than resetting the valve lash. There is a very noticeable power gain throughout the rpm range.

  • dirttrack25

Posted October 25, 2005 - 07:22 AM

#9

I think this is what ill be going with anyway. Unless i can pick up the 450 cam for really cheap

  • 426Climber

Posted October 26, 2005 - 07:59 AM

#10

I'm too far North (Dekalb) to help you with the install. You can get the cam for a really decent price through North County Yamaha. Give them a call don't order online. I got mine for 90$. Also order the blanking plug from the TT store, 24'ish$. All of the instruction and specifications you'll need can be found on TT. If you can find a Yammy shop that carries the shims it'll be an easy 1 day job.





Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.