What air filters do ya run/suggest?


23 replies to this topic
  • MisterMan

Posted July 24, 2005 - 09:42 PM

#1

What air filters do ya run/suggest for a yz426

No Toil
Uni
Twin Air
White bros?

thanks, I was gonna post a poll but the option isant there?? :applause:

ADDED:
thanks every one, next question: how many of ya cut out that back fire screen???

  • Smiticus

Posted July 24, 2005 - 10:20 PM

#2

I run a No Toil. Seems to be doing just fine so far, plus I'm a fan of No Toil cleaner/filter oil.

  • fowler175

Posted July 24, 2005 - 10:24 PM

#3

I have run UNI and Twin Air filters with no probs., and would recommend both of these.

  • sirthumpalot

Posted July 25, 2005 - 03:14 AM

#4

Believe it or not the stocker isn't bad at all.

  • MattyH

Posted July 25, 2005 - 03:38 AM

#5

unifilter procomp2 all the way for me.

i also beg to differ with sirthumpalot on the quality of the stock air filter, the stock unit is small, both layers are bonded around the edge so its harder to clean thoroughly, and the foam isnt as fine as whats available in the aftermarket filters.

  • phat_450f

Posted July 25, 2005 - 04:29 AM

#6

i have always used uni

  • big t

Posted July 25, 2005 - 05:51 AM

#7

Uni :applause:

  • 00YZ426FMRCD

Posted July 25, 2005 - 05:58 AM

#8

Same here. Go with UNi or Twin-Air and you can't go wrong.

  • 642MX

Posted July 25, 2005 - 10:09 AM

#9

I use UNI's.

  • DPW

Posted July 25, 2005 - 10:16 AM

#10

Twin-Air...just because they are a bit smaller than the stocker.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Anssi

Posted July 25, 2005 - 10:20 AM

#11

I use Twin-Airs. The stock ones are crap. Both mine and my dad´s fell apart. OTOH, the Honda stock air filter looks like the best quality filter I have ever seen.

  • rasta

Posted July 25, 2005 - 10:37 AM

#12

no toil

  • MisterMan

Posted July 25, 2005 - 10:51 AM

#13

thanks every one, next question: how many of ya cut out that back fire screen???

  • DPW

Posted July 25, 2005 - 10:53 AM

#14

thanks every one, next question: how many of ya cut out that back fire screen???


screen still on mine...

  • Anssi

Posted July 25, 2005 - 10:55 AM

#15

Cut mine.

  • crfmatt

Posted July 25, 2005 - 11:50 AM

#16

It wasnt one of your options but I use a K&N Filter in mine. I like it so far and its easy to clean and no mess. :applause:

  • BlindSide

Posted July 25, 2005 - 01:26 PM

#17

Hey. Do yourselves a favor. By a stock YZ 250 cage and Twin Air's new air filter with the backfire resistant layer. You're bike will have never ran so crisp.

  • MotoGoalie

Posted July 25, 2005 - 01:32 PM

#18

screen still on mine...


Same here. Runs fine.

  • 642MX

Posted July 25, 2005 - 02:25 PM

#19

thanks every one, next question: how many of ya cut out that back fire screen???



I'm still running the screen, with my luck, the moment I cut the screen it will backfire and burn to the ground. :applause:

  • ride yzf all the way

Posted July 25, 2005 - 06:00 PM

#20

i run uni and it runs my rpms higher





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.