Fork Seal Replacement


1 reply to this topic
  • SONODROOPY

Posted July 20, 2005 - 11:24 AM

#1

I have a manual for my 1995 600R but when it comes to changing the fork seals, the directions get kinda vague. Anyone have a good set of instructions they want to give me (or a link to them)? All the info I see out there says it is pretty easy to do yourself and I hate paying for things I can do myself (pretty handy guy). I only have one bad seal. Can I just change one, or is there some superfandagled thing that will happen if I don't replace both? Your help is greatly appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • BWB63

Posted July 20, 2005 - 12:23 PM

#2

Your need to take the fork all apart.

http://www.borynack....r650r_forks.htm





Then after you take out the dust boot/seal retainer you pull the inner fork tube out of the lower fork housing like a slide hammer. (the maunal spells this out well. You'll need a fork seal tool or a piece of PVC that just fits over the fork tube that is about 24" long. Someday I'll post pictures on the site.


http://xr650r.borynack.com/





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.