Jetting / Trail riding in Colorado


1 reply to this topic
  • dckgmiller

Posted July 12, 2005 - 03:11 PM

#1

2001 WR426

I think I have a jetting problem. I just bought the bike a couple weeks ago. I replaced the stock fuel screw with a Zip Ty fuel screw. Per the directions, set to 1 1/2 turns, move one direction, then the other until you find the least hesitation. Did that.

0 to 1/4 throttle, bike responds fine, just after 1/4 throttle bogs down and continues through 2/3 throttle, bike speeds up but still bogging. Kinda jerking back and forth. I'm thinking it's the needle jet, but I'm new to this.

I'm taking the bike in Friday to a local Yamaha shop and have them look at it.
For those of you in Colorado, what is your bike set up for? (Pilot jet, needle jet, jet needle etc) I'm looking to do trail rides in the Denver area, probably around 7000 to 8000 feet.

Thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 35yz450F

Posted July 12, 2005 - 04:31 PM

#2

http://www.thumperta...ad.php?t=230021




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.