exhaust cam - a bit hard rotating


2 replies to this topic
  • 5valve

Posted July 09, 2005 - 11:03 PM

#1

hi
Im constantly changing between yz and wr timing on my 400, to suit the terrain, but since my last conversion was quite long ago, I lost the red line with the left side cam chain slider rubbing with some force into the chain, not allowing the cam to rotate 100% freely (by hand power), as the intake does

I test it with both cams placed, torqued and chain tensioner not yet applied
:)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Chris_from_Oz

Posted July 10, 2005 - 12:56 AM

#2

Are your cam cap bolts over tightened? :)

  • 5valve

Posted July 11, 2005 - 12:50 PM

#3

no, they are torqued with the torque wrench
the chain is running pressed between slider and exhaust chain sprocket
it can rotate by hand but with a bit force




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.