Replace OEM Throttle stop IMMEDIATLY!! :-)


8 replies to this topic
  • temptation2003

Posted July 09, 2005 - 08:32 PM

#1

I've had my 2003 Wr450 for about 2 yrs and just now replaced the stock throttle stop for the shorter YZ throttle stop and all I can say is HOLLY SIT :) WOW what a difference! For the last two years I've been riding a bike that had decent power and not quite enough top end now it has plenty of top end for almost every occasion. All I have to say is if any of you haven't switched out the stock throttle stop for the YZ one yet do so ASAP you will not regret it and it will be the best 15-20 dollars you've spent in quite some time!
Sincerely
Dan

2003 Yamaha Wr450 Tusk D-flex hand guards

  • Indy_WR450

Posted July 09, 2005 - 08:46 PM

#2

In about 2 years you will be ready for the gray wire! :)

  • rushfan

Posted July 09, 2005 - 09:16 PM

#3

What took you so long? Most of us do that before we ride for the first time!! :)

  • clark4131

Posted July 09, 2005 - 09:18 PM

#4

Newbies are so fun. Sometimes it reminds me of when my 3-year-old son discovered his twig and berries for the first time one day in the bathtub. "Hey Dad, I just found my fruit snacks!"...I thought I was going to soil myself laughing...SC

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Vibeguy

Posted July 09, 2005 - 09:50 PM

#5

........or you can just grind down the stock WR throttle stop, the dimensions are on thumperfaq.com

  • spy

Posted July 10, 2005 - 05:40 AM

#6

I still have the stock wr throttle stop on, just didnt think the difference would be obvious but its probably just me.

  • Team_Oatmeal_Pie

Posted July 10, 2005 - 09:09 AM

#7

Think of it this way, put a 2x4 under your gas pedal in your truck then drive around.
The stock throttle stop doesnt allow the carb slide to open/fully operate within its normal operating range. With it in you are slower then an xr200.......................

  • CRF_173

Posted July 10, 2005 - 09:41 AM

#8

Just wondering but why would they do that? I mean why would yamaha only let the slide open partialaly? That just seems kinda stupid to me....

  • extex

Posted July 10, 2005 - 11:44 AM

#9

I heard that Yamaha does it because sound levels are measured at half throttle and obviously half throttle with a stop is less rpm than without. I don't know if that is factual buy it makes sense. It could also do with emission levels.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.