Power output

2 replies to this topic
  • Snapper

Posted July 07, 2005 - 07:49 PM


Can anyone give me some real figures about the power output of the 1) "01WR426 which I have, and 2)'05WR450 which I will have soon.

I want to put a different reflector on to allow for some road trial we have here which have night laps.

i am currently running LED in the rear and a 75 in the front but have been told it should run about a 120?

This is in the context of what wattage lighting can be run on the standard stator.

I have Aus spec bike but I think that the stator is a factory thing so we all have the same.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • HighPlainsWR

Posted July 07, 2005 - 09:27 PM


Aussie TT Buddy,

Sold an 02' WR426 with throttle cut, wire cut and unplugged two years ago. It pulled 42 ponies on the dealer dyno. Now the 03' WR450 with the same mods, JD Jetting Kit, PowerFlow filter, YZ cams and porting pulls 46 horses on the same machine. :)

This is of course at 4800 ft. above sea level......at sea level I'll bet the same mod WR450 would pull 50+... :)

  • Matty05

Posted July 08, 2005 - 02:21 AM



I think this is what you are after.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.