Ignition Cover Protection


4 replies to this topic
  • 35yz450F

Posted July 07, 2005 - 06:00 PM

#1

What's available other than a full skid plate to protect the ignition cover on my YZ?

  • RogerDedrick

Posted July 08, 2005 - 03:54 AM

#2

I have used the one I purchased from ZipTy Racing. It has taken a beating in the last 2 years but the ignition cover has not recieved any damage.
http://www.ziptyraci...oryID=95&order=

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Ga426owner

Posted July 08, 2005 - 04:23 AM

#3

Lightspeed makes a carbon fiber one

http://www.lightspee...f.com/products/

  • 35yz450F

Posted July 08, 2005 - 06:44 AM

#4

Niether company list one for the YZ450F. Yamaha stopped putting the lower bolt hole in the frame On theYZ450s.

  • RogerDedrick

Posted July 08, 2005 - 07:00 AM

#5

Niether company list one for the YZ450F. Yamaha stopped putting the lower bolt hole in the frame On theYZ450s.

Has the frame changed much in that location? My 2000 did not have the bolt hole. The ZipTy unit came with a little weld on clip with a bolt hole in it.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.