YZ 426 - Stator Plate

2 replies to this topic
  • UK Thumper

Posted July 04, 2005 - 04:01 AM


I have a real problem with my YZ 426 (2002), I have been through a number of stator plates. Fit a new one, fire it up first time, easy as. Do a couple of laps, back to the van, leave it 1/2 hour, kit on ready to race. NO GO !! - The multimeter test reveals no joy from wires that come out of the stator plate. Please any help whatsoever is really welcomed.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Daz_426_02

Posted July 04, 2005 - 05:05 AM


What was the original reason for changing it in the first place? IS the fly wheel not rubbing on it somewhere? Are the coils breaking down?

  • UK Thumper

Posted July 04, 2005 - 07:14 AM


The first one that was replaced was just worn, the coils just broke down, so can understand that, the othere when fitted work fantasticlly and upon inspection look fine, just no resistance when tested via multimeter, very very strange.

Related Content


Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.