Better Brakes XR650L ... and R


12 replies to this topic
  • justicedone

Posted July 03, 2005 - 10:29 PM

#1

Just found this browsing the net, thought I would share it with other XR owners.

Havent seen many upgrades for the L.... so here goes ----->

http://www.map-engin....com/brakes.htm

  • GIANTac1

Posted July 03, 2005 - 11:10 PM

#2

Hmmm.......

  • The Bossman

Posted July 04, 2005 - 05:37 AM

#3

sorry for the newbie question, but would my 650R HAVE to be a supermotard to use those?

  • roadcam

Posted July 04, 2005 - 09:36 AM

#4

rockymountainatv.com has an EBC oversized rotor kit (280mm) for only $135 ... they catalog a kit for the XR250R - XR400R - XR600R, and XR650R ..... anybody know if it may fit a XR650L ?? I have found several 600 parts to fit the 650L, not sure about brakes .. :)

  • justicedone

Posted July 04, 2005 - 09:49 AM

#5

I havent seen any for the L model, so thats why I posted this.

  • Rover31

Posted July 04, 2005 - 05:04 PM

#6

I have looked at that set up I think that it would be a lot for the dirt.
Travis

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • fuct

Posted July 04, 2005 - 10:51 PM

#7

XR600 & XR650R rotors will not mount to a L.

  • justicedone

Posted July 05, 2005 - 06:42 AM

#8

yeah..I remember that wave rotor you had not fitting.

But they list one for a XR650L, its damn expensive and I wouldnt buy one..just posted for info or SuperMotard guys.

  • easton_kooka

Posted July 05, 2005 - 09:04 AM

#9

The XR650R front hub fits in an XR650L with the same spacing. This allows you to run all the XR650R brake kits on the L. I'm running the EBC 320mm kit on my XR-L with a XR-R hub now. The only caveat is that with 17" rims it is a very tight fit. FYI: The rear xr600 hub also fits in the XR-L rear end.

  • Payne

Posted July 28, 2006 - 04:08 PM

#10

Hi guys,
I've found this : http://cgi.ebay.com/...sspagenameZWD1V

let me know if there any good :thumbsup:

  • justicedone

Posted July 28, 2006 - 05:23 PM

#11

looks like a good deal

man you brought this post back from a long time ago. even I didnt recognize it and I started it Ha ha ha

  • Payne

Posted July 28, 2006 - 10:23 PM

#12

no prob, i've been thinking of making additional mods to my bike, which explains the reading up on old topics, I hope someone tries this so we can get some feed back on the braking power.

  • lhark

Posted July 29, 2006 - 07:24 AM

#13

One of the best improvements to stock brakes on an L, is to put a braided steel brake line on, IMO. The stock discs and pads are pretty decent, with this simple fix.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.