650r Jetting


2 replies to this topic
  • WFODEZ

Posted June 30, 2005 - 12:46 PM

#1

Is It Possible To Change The Pilot As You Can The Main Without Removing Tank, Seat Etc?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DGXR

Posted June 30, 2005 - 12:54 PM

#2

I think you can. After removing the bowl, you will probably need a flashlight to see up into the carb body and a tiny screwdriver to reach the pilot because it's an awkward angle. Also, it should not be too tough to just remove the carbs so you have the best access.

  • frankstr

Posted June 30, 2005 - 01:07 PM

#3

Just take your tank off, Loosen the rubber boot screw clamps and spin the carb enough to remove the bowl..No need to remove carb to change pilot jet..
I do believe you need to remove carb bowl......





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.