Andrew in OZ - what are your carb settings?



2 replies to this topic
  • John_in_Long_Beach

Posted March 01, 2001 - 04:42 PM

#1

Andrew,

I just installed my EKN needle with what seems like a similar setup to yours.
(See resent post "EKN needle results")

What are the settings that you think works best for your bike? Main Jet, Pilot Jet, Pilot Air, Needle position, number of turns out?

Thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Andrew_in_OZ

Posted March 01, 2001 - 05:48 PM

#2

John,
At the moment i'm using #168main,#45pilot #48 was slightly rich,1 3/4 turns out#3 clip pos.(pump lever stop screw installed 1.8mm of stroke).I will be experimenting a bit more this weekend as I have just upgraded to a vortex cdi :)

------------------
Andrew
"00"WR400
YZ timing,EKN needle, VORTEX dualcurve ignition
SF triple platinum s/plug
open box -unifilter
98oct fuel
Staintune s/s open exhaust& header......
Somebody stop me !!!

  • John_in_Long_Beach

Posted March 01, 2001 - 08:31 PM

#3

I will mess around with mine this weekend and let you know what results I come up with.

Have you tried the needle at #4? Was this too rich also?




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.