Grounds/Earths on a 426

No replies to this topic
  • SpikeHammer

Posted June 21, 2005 - 11:21 AM


The frame has been powdercoated and I'm sure this is stopping the grounds working. It's not my bike and I don't have a manual so I'm working in the dark a bit so need a bit of help. :D
How many grounds are there, and from where to where.
I've got the coil grounded to the frame (stripped back the P/C), the rectifier to the frame(again stripped the P/C back), are there any I'm missing? :)

The issue I have is no spark, everything on the loom has been plugged back into it's original connectors etc.

Any other things I can check?

All help greatfully recieved. :)


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.