what's best clutch stock or aftermarket

4 replies to this topic
  • motorman

Posted June 13, 2005 - 07:55 PM


just like to get some input. trying to find the best clutch to use . stock honda or after market. any input would be helpful

  • Slowmotion426

Posted June 13, 2005 - 07:56 PM


Run your stock til it's worn out. Then put in an aftermarket like Hinson or Barnette.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • targetdrone

Posted June 13, 2005 - 08:17 PM


I put an EBC set of fiber discs on my XL600. Blecht!!! It changes the settings when it gets hot. I will only buy stock plates anymore.

  • TimBrp

Posted June 14, 2005 - 03:24 AM


I've gone with Barnett twice with my bike. After replacing the basket this season with a hinson it's not "grabby" anymore. The stock basket could have the slightest groove and the plates would get caught on it. Granted swapping a basket is not a fun job but it's well worth it.

  • XR4DEZ

Posted June 14, 2005 - 07:51 PM


Stock parts but not the stock configuration, take out everything to the basket and replace with 7 fibers and 6 steel. You won't believe how much stronger the motor pulls.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.